Kako ožičiti automobilski stereo ispočetka?

Jeste li ikada putovali u izvrsnom automobilu, ali ste imali glazbu niske kvalitete? Nažalost, to je bio problem u većini automobila.

Općenito, mnogi automobili dolaze s tvornički ugrađenim glavnim jedinicama koje nisu na razini. To je zato što većina proizvođača automobila ne ulaže najveći napor u kvalitetu zvuka i audio opreme automobila.

Najčešća i najbolja odluka je tada zamijeniti glavnu jedinicu automobila naknadnim radiom, ali kako ožičiti stereo uređaj u automobilu od nule? Saznajmo.

Prvi korak u povezivanju auto-radija je uklanjanje kabelskog svežnja i odvajanje žica koje povezuju zvučnike i napajanje. Sljedeće je priključiti žice na novi kabelski svežanj ili adapter kabelskog svežnja i priključiti ga na novi radio. Kada je spojen, testirajte auto radio i ako radi ispravno, postavite ga na kontrolnu ploču.

Cijeli postupak zamjene uključuje instalaciju i ožičenje autoradia. U ovom članku pokazat ću vam vodič korak po korak o tome kako spojiti radio u automobilu.

Kako ožičiti radio u automobilu od nule. Sveobuhvatni vodič.

Poput drugih postupaka, pridržavanje odgovarajućih uputa o ožičenju stereo uređaja osigurava visokokvalitetni zvuk u vašem automobilu.

Odvojite vrijeme da pažljivo pročitate svaki korak i postupite u skladu s njim. Pazite da ne radite u žurbi i posvetite puno pažnje poslu.

Koji su alati potrebni za ožičenje automobilskog stereo uređaja?

Prije nego što bilo što učinite s auto radijem, trebali biste pripremiti neke osnovne, ali neophodne alate.

Vjerojatno sve imate u svojoj garaži, ali ako ne, dodao sam Amazonove veze na alate koje koristim i zadovoljan sam kvalitetom:

• Digitalni multimetar.

• Skidači žica.

• Krimperi.

• 9-voltna baterija ili tester zvučnika.

• Električna traka.

1. korak:Uklonite radio i odspojite kabelski svežanj

Prvo uklonite stari stereo s ploče i odspojite kabelski svežanj. U ovom trenutku, ovisno o novom radiju, možda ćete trebati adapter za ožičenje kako bi vam pomogao u povezivanju vašeg novog autoradija s postojećom kopčom u automobilu.

Adapter za ožičenje pomaže u povezivanju jedinstvenih stereo uređaja za automobil sa standardnim DIN priključkom iz automobila i izbjegava bilo kakva pogrešna spajanja.

2. korak:Odspojite bateriju

Prilikom ožičenja morat ćete raditi na električnom sustavu.

Dakle, postoji mogućnost strujnog udara i zato se preporuča odspojiti bateriju prije početka procesa spajanja žice.

U većini automobila bateriju ćete pronaći ispod haube, u nekim rijetkim slučajevima kada je ugrađena u stražnjem dijelu vozila.

Nakon što pronađete bateriju, ručnim ili nasadnim ključem olabavite crni kabel s negativnog pola baterije.

Razmislite o tome da izgubite vijak i povucite kabel prema dolje na stranu baterije kako biste bili sigurni da ne dodiruje pozitivne žice. Ako ne odspojite akumulator, to može oštetiti vas ili električnu opremu automobila.

3. korak:Omotajte sve spojene žice

Značaj toga je osigurati njihove točke povezivanja.

Nakon što provjerite sve žice i povežete ih s automobilom, bitno je da spojevi budu trajni.

Uvjerite se da nema golih žica u auto-radiju, a da biste iskrivili spojeve žica, možete koristiti električnu traku .

Možete koristiti druge načine za omotavanje žica, ali korištenje trake je najlakši, najjeftiniji i najčešći način koji mnogi ljudi koriste.

3. korak:Testirajte svoj auto radio

After making the connections and securing them, you have to reconnect the battery to be able to test the stereo before placing it permanently in the dashboard.

It is advisable to install the car radio after checking it is working perfectly. First, however, you need to check its all functions, including speakers connections.

Finding something that is working incorrectly means the wires are not connected right, and often mistake is wrong connection of the speaker wires.

Step 4:Place the Wires Harness Into the Dashboard

After ensuring that all of your connections are tight and secure, it’s now time to install wiring inside the dash.

This includes connecting an often-forgotten antenna wire from car radio signal reception equipment so you can enjoy clear communications while driving!

You have to remember that there should be enough space for your radio in the dashboard, so make sure all wires are pushed into the dashboard.

This way, the stereo won’t get stuck when trying to move or remove from its position later on without damaging anything!

Step 5:Place the Car Radio Into Its Place

In most cars, there is an opening inside the dash where the car radio should be placed.

While installing the car radio, make sure it perfectly fits into the slot, and there are no extra wires that would block free movement.

If you feel some resistance while pushing the radio, never force it with too much pressure to its position. Otherwise, you can damage the wiring connectors at the backside.

In this case, an adaptor is very helpful at sliding the car radio properly in its correct position. An adaptor is available at any electronic store or auto parts store.

Step 6:Secure the Car Radio in Its Position

You can secure a car radio into two main methods.

• One of them is for the car radios that need spring clips. Once the stereo is locked at the correct position, the clips close and you can hear a click sound.

• The other one that is less common, involves brackets and bolts that need proper fixation. Bolting the radio permanently helps to secure it in the place.

Step 7:Install Dashboard

This is the final step of the wiring process and involves assembling every piece of the trim and the plastic clips.

At the same time, be careful to avoid the damage of any plastic parts and take time to check if the overlapped pieces have been correctly layered.

If you come across some plastic parts that have been broken, you can use hot glue to secure them.

However, using glue is not highly recommended since the plastic parts you fix can become difficult to remove in the future.

If the entire rim piece has been broken completely, the only option you have is to buy a replacement.

How to Test Car Radio Wire for Their Right Connections

All wires have to be in good condition and connected to the radio without interruptions.

Below I listed a few simple checks you can do to make sure the stereo’s connection is correct:

Constant wire

This wire comes with 12 volts, and it supplies power directly from the battery.

To test if it is working, the first thing you should do is put off your ignition. Afterward, ground the black wire, pick up the red meter probe and connector, and touch it with the constant yellow wire.

The constant wire should give the reading up to 12 volts with a 0.5V difference.

Speaker wire

The simplest way to test the speaker wires is to use a 9-volt battery. You can also use a multimeter to test the speakers but make sure you set it to resistance before testing.

Accessory Power

Turning off the ignition makes the wire show a zero volt reading at a meter. Upon turning it on, it reads 12 volts and 0.5 volts.

Ground wire

Identifying the ground wire is straightforward after identifying the constant wire. Then, after proper testing, the ground wire is connected to the black wire.

Note that it is necessary to begin attaching a red meter probe with constant wire and later a black meter probe with the wire you are testing.

If the reading on the meter is similar to the constant wire testing, that is the ground wire.

Frequently Asked Questions (FAQs)

Where Is the Ignition Wire Located?

Depending on the car, the ignition switch harness is located inside the steering wheel column on either the left or right side.

The ACC wire is the one often 18 gauge yellow or pink. Installing this wire at a local electrical specialist can help you ensure the installation.

What Happens if You Do Not Ground a Car Stereo?

It is impossible to operate a car stereo without a proper ground wire installed.

The correct ground connection allows your radio to work perfectly without malfunctioning issues when the car is on.

How Can I Tap the Wires When Wiring a Car Stereo Without the Harness Clip?

The best solution is to look at your car’s electrical manual. However, if the manual is unavailable, you have to trace every wire.

Using a multimeter will be a good idea in this task. Since car electrical systems can be tricky to manage, do not attempt to play with the car’s electrical system without basic knowledge.

Zaključak

You have no reason to stay in an excellent car with a poor music system with the above guides.

Remember, adding a new car radio in your car is a great way to breathe new life into your vehicle. However, for the stereo to work at its own best, you have to follow the installation and wiring process.